Assign Service to Channels for Testing
4.Select Services to Channels.
5.Press ENTER to display the services to channels screen.
The system responds with the Assign Services to Voice Channels screen, as shown in Figure
Figure A-9. Assign Services to Voice Channels Screen
6.Verify that the cursor is on the Service field in the Assign Service to Voice Channels screen.
7.Press F2 (Choices) to display all possible services.
8.Select ChanTran for all channels.
NOTE:
ChanTran is for testing purposes only. It will not support Voice Mail or Voice Response.
9.Enter all in the Channels field.
10.Press F3 (Save).
NOTE:
A Command Output screen verifies that the designated channels are assigned the selected service.
11.Press F6 (Cancel) three times to reach the INTUITY Administration menu.
12.Continue with "Test Each Channel".
Issue 1 June 2000
