[4]SCALE

This setting determines how the thermostat displays all temperatures on the screen. Switch position OFF is F°, and ON is C°.

[5]TIME

This setting determines how the thermostat displays the clock and all other time values on the screen. Switch position OFF is 12 HR (US Standard), and ON is 24 HR (Military Time).

[6]BATTERY MONITOR

This determines whether the internal battery voltage monitor watches the condition of the batteries that are installed in the thermostat. This setting should always remain enabled unless the thermostat is being powered by System Power alone, without any batteries present. Switch position OFF is Battery Monitor On (Enabled), and Switch position ON is Battery Monitor Off (Disabled).

WARNING:

Undesired operation may result if the battery monitor is set to “Disabled” while this thermostat has batteries installed.

9. COMPLETING THE INSTALLATION

Once all hardware option settings are performed, install two new Energizer® or DURACELL® "AA" size alkaline batteries before continuing further. Ensure that the batteries are installed in the proper direction as per the markings shown in the battery tray. If batteries were already installed before setting changes were performed, simply change the Temperature Mode switch on the front panel to any other position so that the new settings may be recognized by the thermostat.

18

Page 18
Image 18
Lux Products TX9100E warranty Scale, Battery Monitor, Completing the Installation