buttons, adjust the clock to the current time, and make sure that the proper AM or PM indication is observed as appropriate. To assist with large adjustments, the clock digits will increment rapidly in either direction if the UP or DOWN buttons are held pressed for more than a few seconds.
HEATING AND COOLING
Basic operation of your heating or cooling system can be obtained by ensuring that the rotary dial is in the RUN position, and simply moving the Temperature Mode switch to either the HEAT or COOL position. Manual adjustment of the set temperature can be performed at any time by using the UP/DOWN buttons. While the words “SET TEMP” are being displayed, you are able to adjust the set temperature to any desired value within the normal operating range.
Prior to being set initially with your custom temperature programs, the thermostat will follow the default Energy Star® approved temperature programs that are preset within the thermostat’s memory. A table of the default heating and cooling programs is shown below:
PERIOD | HEAT MODE | COOL MODE |
MORN | 6:00 AM 70 °F (21 °C) | 6:00 AM 78 °F (26 °C) |
DAY | 8:00 AM 62 °F (17 °C) | 8:00 AM 85 °F (29 °C) |
EVE | 6:00 PM 70 °F (21 °C) | 6:00 PM 78 °F (26 °C) |
NITE | 10:00 PM 62 °F (17 °C) | 10:00 PM 82 °F (28 °C) |
WAIT ICON
On the far right edge of the display screen, the words “WAIT” may show up flashing from time to time. This Wait indicator appears if there is currently a demand present for heating or cooling activation, but the minimum off time delay has not yet been satisfied. This provides protection for your heating and cooling equipment, but lets you know that the system will turn on shortly if it is required.
21
