Focus Measurement

When the calibration is OK, press Enter to start the measuring process and ‘Measuring Focus position …’ will be displayed. Each measurement comprises four steps:

•A low and a high frequency measuring signal first in the left and then in the right channel.

The length of each measurement depends on a combination of the measurement volume, set in the calibration process, and the background noise in your local environment. Typical measuring times for the low and high frequency measuring signals are 25 and 5 seconds, respectively.

You can exit a commenced measurement by clapping close to the microphone.

Do not sit in the listening position during focus measurements.

The measurement will stop prematurely if an error occurs during the measuring process. In this case, an error message is displayed. Press Enter to continue and ‘Retry focus measurement – press Enter’ is displayed.

If the error needs correcting this should be done at this point (see RoomPerfect™ troubleshooting), thereafter press Enter to retry the measurement. The measurement procedure will start again.

A measurement has ended successfully when the last measuring signal stops and the display shows a RoomKnowledge rating, as ‘RoomKnowledge XX% - Measurement ok’. Press Enter to continue.

Room Measurements

The number of room positions needed depends on the value of RoomKnowledge, if it is below 90% after the third measurement the guide automatically includes extra room measurements until a RoomKnowl- edge of 90% or more has been achieved.

The remaining measurements are to be placed in random positions in the room with random orienta- tions of the microphone. Choosing these random or arbitrary positions and orientations is easy. All you have to do is place the microphone at different positions in the room and with different orientations. It is important to perform well spaced measurements to get a covering image of the acoustical properties in the room, i.e. varying positions, heights and orientations of the microphone.

For an optimal room correction it is very important that the measurements are:

1.performed more than 1 meter (approx. 3 feet) away from the loudspeakers,

2.not performed behind the loudspeaker, and

3.that there is at least 50 cm/1.5 ft between each measurement.

3.

50cm

2.

Not behind

loudspeaker

1.

1m

17

Page 16 Page 18
Page 17
Image 17
Lyngdorf Audio TDAI 2200 owner manual Focus Measurement, Room Measurements
Page 16 Page 18

TDAI 2200 specifications

Lyngdorf Audio has established itself as a leader in high-fidelity audio solutions, and the TDAI 2200 is a testament to their commitment to excellence. This integrated amplifier combines cutting-edge technology and exceptional sound quality, making it a popular choice among audiophiles and casual listeners alike.

At the heart of the TDAI 2200 is its powerful 2 x 200-watt amplification, which delivers a clean and distortion-free output. The amplifier is designed to drive a variety of speaker types, ensuring compatibility with different audio setups. This versatility allows users to enjoy their favorite music with remarkable clarity and precision.

One of the standout features of the TDAI 2200 is its RoomPerfect technology. This advanced room correction system automatically analyzes the acoustics of your listening space and adjusts the sound output accordingly. By compensating for room anomalies, it creates an optimal listening environment, ensuring that you experience the best possible sound quality regardless of your room's characteristics.

The TDAI 2200 also includes a built-in digital-to-analog converter (DAC) that supports high-resolution audio formats. This DAC enhances the overall audio experience by allowing users to enjoy their music in its purest form. The amplifier supports a wide range of digital inputs, including USB, optical, and HDMI, making it easy to connect to various multimedia devices.

Another key feature of the TDAI 2200 is its streaming capabilities. It supports various streaming services and offers Bluetooth connectivity, allowing users to easily stream their favorite music from smartphones, tablets, or computers. The integration of streaming features ensures that the TDAI 2200 fits seamlessly into modern audio setups.

Moreover, the user-friendly interface and intuitive design make it easy to operate the TDAI 2200. The customizable settings enable users to tailor the audio experience to their preferences, providing ultimate flexibility for different listening scenarios.

In conclusion, the Lyngdorf Audio TDAI 2200 stands out for its exceptional sound quality, sophisticated technologies, and user-friendly features. Whether you're an audiophile seeking precision or a casual listener looking for convenience, the TDAI 2200 promises an enriching audio experience that showcases the best of Lyngdorf Audio's engineering prowess.
Top Page Image Contents