Briggs & Stratton 7800886, BTXPV22725E, 7800887 manual Specifications All, Mower, Engine

Specifications (All)

Mower

	Deck Size (in / cm)			22 / 56
	Height of Cut (in / cm)			1.25 - 4.00 / 3,18 - 10,16
	Transmission Type			Variable Speed/Gear
	Ground Speed (mph / kph)			0 - 4 / 0 - 6,4
	Blade Torque (lb-ft / N.m.)		for	40 / 54
Engine
	Gross Engine Power * (lb-ft)			7.25
	Engine Displacement (cc)			190
	Fuel Tank Capacity (qt / l)	Not		1.0 / 0,95
	Oil Capacity (oz / l)			18 - 20 / 0,54 - 0,59
	Spark Plug Gap (in / mm)			0.020 / 0,50
	Spark Plug Torque (lb-in / N.m.)			180 / 20

Net power values are taken with exhaustReproductionand air cleaner installed whereas gross power values are collected without these

* Power Ratings: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horse- power values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM.

attachments. Actual gross engine power will be higher than net engine power and is affected by, among other things, ambi- ent operating conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gas engine may not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine- to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

www.brutepower.com