Operation
|
|
|
| |
4.00 in | ||||
1.25 in | ||||
| 3,18 cm |
| 10,16 cm |
Figure 10: Cutting height settings (approximate)
Installing the Discharge Deflector
Installing the Grass Bag
! | WARNING | ! |
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Remove starter insert. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all com- ponents to cool.
Important: The mulching plug must be removed only when bagging is desired, and must be replaced as soon as bagging operations are completed.
1.Raise the rear discharge door (A, Figure 12).
2.Remove the mulching plug (B) from the rear dis- charge chute.
! | WARNING | ! |
|
|
|
| Reproduction | A | |||
DO NOT attempt any maintenance, adjustments or service |
|
| |||
with engine and blade running. STOP engine and blade. |
|
|
| ||
Remove starter insert. Disconnect spark plug wire and |
|
|
| ||
secure away from spark plug. Engine and components are |
|
|
| ||
HOT. Avoid serious burns, allow sufficient time for all com- |
|
|
| ||
ponents to cool. |
|
|
|
|
|
1. Raise the mulching cover (A, Figure 11). |
|
|
| B | |
2. Install the deflector (B) to the deck under the |
|
|
| ||
mulching cover, making sure that the locking tabs |
|
|
| ||
on the deck (C) go through the slots in the deflec- |
|
|
| ||
tor (B). |
|
|
|
|
|
3. Lower the mulching cover against the deflector. |
|
|
| ||
|
| A | Figure 12: Removing the mulching plug |
| |
|
|
|
|
| |
|
|
| 3. Holding the grass bag handle (A, Figure 13), | ||
|
|
| install the grass bag onto the mower, making sure | ||
|
|
| that the grass bag hooks (B) are hooked onto the | ||
|
|
| rear door pivot | (C). |
|
B |
C |
Figure 11: Installing the discharge deflector
en
15
