Rear Panel
MIC TRIGGER
OUT
1.Digital Input
RCA connectors for SPDIF input
2.Digital Output
Selected digital input is sent – full range or filtered via the DSP - to the Digital Output connector for daisy- chaining more than one TDAI 2200. The sample rate is fixed at 96 kHz. This output is also active when Analog input is selected.
3.Digital input 4
XLR Connector for AES input
4.Optical Digital input 5 Connector for Toslink input
5.Analog output
DAC output from DSP Section
Balanced Analog input L/R number 4
The connectors from
11.Loudspeaker terminals Loudspeaker output.
All Outputs are bridged and must never be connected to ground because of the DC offset to chassis
8