Lynx L-210 manual DSL Link LED continues to blink but does not go solid

1.	Introduction		3
	1.1	Features	3
2. Your gateway at a glance			5
	2.1	Ports and buttons	5
	2.2	LED description	5
3. Installing your Lynx L-210			6
4. Setting up your Lynx L-210			7
	4.1	Log into your Lynx L-210	7
	4.2	Quick Start	7
	4.3	Setup (for advance user)	8
	4.3.1	Wide Area Network connection	9
	4.3.2	Local Area Network connection	9
	4.4	Configuring the WAN	9
	4.4.1	New Connection	9
	4.4.2	Modify an Existing Connection	16
	4.4.3	Modem setup	16
	4.5	Configuring the LAN	16
	4.5.1	Enable/Disable DHCP	17
	4.5.2	Changing the Lynx L-210 IP address	18
	4.5.3	Firewall/NAT Services	19
	4.6	Advanced (for advance user only)	19
	4.6.1	UPnP	19
	4.6.2	Port Forwarding	20
	4.6.3	Advanced Security	21
	4.6.4	Access Control	22
	4.6.5	LAN clients	22
	4.6.6	MAC Address Filters	22
	4.6.7	Multicast	24
	4.6.8	Static Routing	25
	4.6.9	Dynamic Routing	25
	4.7	Tools	26
	4.7.1	System Commands	26
	4.7.2	User Management	27
	4.7.3	Update Firmware	27
	4.7.4	Ping Test	27
	4.7.5	Modem Test	28
	4.8	Status	28
	4.8.1	Network Statistics	28
	4.8.2	Connection Status	28
	4.8.3	DHCP Clients	29
	4.8.4	Modem Status	29
	4.8.5	Product Information	29
	4.8.6	System Log	29
5.	Appendix A: Troubleshooting		30
	5.1	The Lynx L-210 is not functional	30
	5.2	I can’t connect to the Lynx L-210	30
	5.3	The DSL Link LED continues to blink but does not go solid	30
	5.4	The DSL Link LED is always off	31
6.	Lynx L-210 terms		32

2