M&S Systems dmc1/dmc1CD owner manual SCAn1, Audio Settings, Volume, Tone

dmc1

AUTO	SCAn1		POWER
			TONE
TIME
PRESET			SOURCE
∧			∧
TUNE	LISTEN	TALK	VOLUME
∨	DOOR TALK		∨

PRESET + SOURCE

Change Scan mode.

Figure 5—Scan Mode

Audio Settings

Volume

•Music—Adjusts the volume for system music

•Master Station—Adjusts the volume for the speaker on the Master Station only

•Intercom—Adjusts the volume for the system intercom

Tone

•Loudness

•Treble

•Bass

•Balance (if you have the optional stereo power amplifier)

To change volume and tone settings:

1.Press POWER to turn on music. The system defaults to music volume. Use VOLUME UP and VOLUME DOWN to adjust the music volume from 0-29. All other audio settings return to music volume after 5 seconds.

2.Press TONE. Master Volume appears. This controls the volume for the Master Station speaker only. Use VOLUME UP and VOLUME DOWN to adjust the Master Volume from 0-29.

www.mssystems.com 800.421.1587 7