M-Audio USB specifications E N G L I S H

E

N G L I S H

1.Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB to your computer’s USB port at this time. Browse the CD content and double click the Transit USB folder.Then double click the Transit USB Icon.

2.The M-Audio Transit USB Installer screen will appear, asking you to confirm that you wish to install Transit USB. Click Next to continue.

3.The installer will copy the Transit USB files to your computer’s hard drive.

4.Once the driver files have successfully been installed, the CD Performance Enhancements screen will appear. By default, the performance enhancement settings for CD and DVD playback will be selected. It is recommended you leave them selected unless you are certain that your hardware is incompatible with these settings.

5.After the driver files have been installed, you will be prompted to restart your computer. Click Finish and your computer will reboot.

6.On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system tray. Connect the Transit USB to your computer’s USB port.

7.The New Hardware Wizard will write the remaining files to your system.

8.If you are running an older version of Windows ME, you may be required to replace the

E

N G L I S H

14 15