M-Audio USB specifications Windows 98SE, E N G L I S H

E

N G L I S H

file ksuser.dll. Click Yes to continue.

9.If you are running an older version of Windows ME, you may be required to replace the file stream.sys. Click Yes to continue.

10.After the installation is complete, you may double-click on the M-Audio Transit USB Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB Control Panel” for more information on the Control Panel’s features and function.

Windows 98SE

Note: Transit USB requires that you have Microsoft DirectX version 8.1 or later installed. The Transit USB installer will automatically check for the correct version of DirectX and install the latest Direct X update. This update will be skipped if you already have DirectX version 8.1 (or higher) in your system.

1.Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB to your computer’s USB port at this time. Browse the CD content and double click the Transit USB folder.Then double click the Transit USB Icon.

2.The M-Audio Transit USB Installer screen will appear, asking you to confirm that you

wish to install Transit USB. Click Next to continue.

3.The installer will begin to copy the Transit USB files to your computer’s hard drive.

4.Once the driver files have successfully been installed, the CD Performance Enhancements screen will appear. By default, the performance enhancement settings for CD and DVD playback will be selected. It is recommended you leave them selected unless you are certain that your hardware is incompatible with these settings.

E

N G L I S H

16 17