Installation Instructions

1CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE (cont.)

AIf you are using copper tubing, place a compression nut and ferrule (sleeve) onto the end of the tubing coming from the house cold water supply.

If you are using the GE SmartConnect™ tubing, the nuts are already assembled to the tubing.

BIf you are using copper tubing, insert the end of the tubing into the refrigerator connection, at the back of the refrigerator, as far as possible. While holding the tubing, tighten the fitting.

If you are using GE SmartConnect™ tubing, insert the molded end of the tubing into the refrigerator connection, at the back of the refrigerator, and tighten the compression nut until it is hand tight. Then tighten one additional turn with a wrench. Overtightening may cause leaks.

CFasten the tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

One of the illustrations below will look like the connection on your refrigerator.

Icemaker-Ready models

1/4″ Copper

TubingTubing

Clamp

1/4″ Compression Nut

Ferrule (sleeve)

Refrigerator

Connection SmartConnect™

Tubing

Icemaker-Installed Models

 

Ferrule

″

Refrigerator

(sleeve)

1/4

Compression

Connection

 

Nut

 

 

SmartConnect™

 

 

Tubing

 

 

1/4″ Tubing

Tubing Clamp

21

2TURN ON THE WATER SUPPLY

(icemaker and dispenser models)

Turn the water on at the shutoff valve (house water supply) and check for any leaks.

3PLUG IN THE REFRIGERATOR

On models with an icemaker, before plugging in the refrigerator, make sure the icemaker power switch is set to the O (off) position.

See the grounding information attached to the power cord.

4PUT THE REFRIGERATOR IN PLACE

Move the refrigerator to its final location. Make sure the back side of the refrigerator engages the anti-tip bracket properly. The anti-tip floor bracket should line up with the cutout in the back bottom of the refrigerator, and fit through the cutout when the refrigerator is pushed into position. (Refer to page 18, Step 2A for more information.)

5LEVEL THE REFRIGERATOR

Turn the front roller adjusting screws clockwise to raise the refrigerator, counterclockwise to lower it. Use a 3/8″ hex wrench

with extension, or an

Roller adjusting screws

adjustable wrench.

 

To adjust the rollers on 21‘ Counter Depth models:

These models also have rear adjustable rollers so you can align the refrigerator with your kitchen cabinets. Use a 3/8″ hex wrench with extension to turn the screws for the rear rollers— clockwise to raise the refrigerator, counterclockwise to lower it.

Page 20 Page 22
Page 21
Image 21
Mabe Canada 21, 25 Connecting the Refrigerator to the House Water Line, Turn on the Water Supply, Plug in the Refrigerator
Page 20 Page 22

21, 25 specifications

Mabe Canada has established a reputation for producing high-quality and innovative home appliances that enhance everyday living. One of its standout offerings is the Mabe Canada 25,21 refrigerator, which combines modern design with cutting-edge technology to meet the needs of contemporary households.

The Mabe Canada 25,21 refrigerator features a stylish exterior that complements any kitchen aesthetic. Its sleek lines and modern finish make it a visual centerpiece while adhering to practical functionality. The appliance is designed with energy efficiency in mind, utilizing advanced insulation technology that minimizes electricity consumption while maximizing performance. This not only helps reduce energy bills but also supports environmentally conscious living.

Inside, the Mabe 25,21 refrigerator is equipped with adjustable shelving, allowing users to customize their storage options to accommodate various food items. The spacious interior is designed to keep food fresher for longer, with advanced humidity control to maintain optimal conditions for perishable items. The crispers are designed to preserve fruits and vegetables, ensuring that they remain crisp and flavorful.

One of the standout technological features of the Mabe 25,21 refrigerator is its multi-air flow system. This technology ensures even distribution of cold air throughout the compartments, preventing hot spots and keeping food at an ideal storage temperature. Additionally, the refrigerator boasts a smart temperature control system that allows users to monitor and adjust settings with ease.

Other notable features include LED lighting that illuminates the interior efficiently, making it easy to see and access items, even in low light conditions. The refrigerator is also designed for quiet operation, ensuring it doesn't disrupt the household environment.

In terms of user-friendly features, the Mabe 25,21 includes a water and ice dispenser, allowing for easy access to chilled water and ice on demand. This feature is particularly convenient for families and individuals who enjoy staying hydrated.

Overall, the Mabe Canada 25,21 refrigerator stands out for its blend of aesthetic appeal, energy efficiency, and functionality. With its innovative technology and thoughtful design, it meets the demands of modern living while enhancing the enjoyment of home cooking and food storage. For anyone in the market for a reliable and stylish refrigerator, the Mabe 25,21 is a commendable choice.
Top Page Image Contents