2.Brightness- allows you to adjust the screen brightness. Tap the numbered icons to adjust your screen brightness, from
NOTE- Brightness setting 1 will make your screen exceedingly hard to view, and may make readjusting your settings! Please exercise extreme caution when adjusting your brightness!!
Calibrate
This setting will allow you to calibrate the screen of your player to increase the accuracy of the touch screen. The screen comes pre calibrated, but you can calibrate it to your specific touch using this feature. Just tap the cross hair in the middle to calibrate the device.
Power off Timer
This option allows you to set a timer to automatically power the player off. This setting is great if you plan on dozing off to some music, but don’t want to drain
the battery of your device. Tap the 
or 
icons to adjust this item.
Default Settings
This option will allow you to restore the player to factory defaults.
Upgrade
This option will allow you to update the firmware on the player. Firmware updates will be released at www.machspeed.com. Please check there regularly for updates.
Video Conversion
If your video files will not play on your Trio player, you can convert them using the conversion tool which is included with the device. To do so, you will need to first install the software.
When you connect the player to your computer, it will act as a removable disk drive. Open the drive, as described in the Copy and Paste section of the manual. Inside, there is a folder called “Tools & Manual”. Open this folder, and then the “Tools” folder. Inside is a Setup.exe application. Run this file and follow the onscreen instructions. Please note that depending on your OS version and security settings you may need to right click on the file and select “run as administrator”
Once installed, you will have an item called “Media Player Utilities” in your programs list. Select this item and then “Video Converter” or “AVI Converter”.
