Dell E05S001 HyperTransport, Error caused a, For details, Following faulty, DIMMs are, Ignored

Message	Causes	Corrective Actions
HyperTransport	A fatal system error occurred	Check the SEL for
error caused a	and caused the system to	information that is logged
system reset!	reboot.	during the error. See the
Please check the		applicable troubleshooting
system event log		section in "Troubleshooting
for details!		Your System" on page 151,
		for any faulty components
		specified in the SEL.
Warning:	Faulty or improperly seated	See "Troubleshooting Your
Following faulty	memory module(s). Check	System" on page 151.
DIMMs are	both DIMMs in the same
ignored:	channel for a possible fault.
DIMM n1 n2
Total memory size
is reduced.
Warning:	Faulty or improperly seated	See "Troubleshooting Your
Following faulty	memory module(s). Check	System" on page 151.
DIMMs are	both DIMMs in the same
disabled:	channel for a possible fault.
DIMM n1 n2
Total memory size
is reduced.
Warning: The	Invalid memory	Ensure that the memory
installed memory	configuration. The system	modules are installed in a
configuration is	will run but with reduced	valid configuration. See
not optimal. For	functionality.	"General Memory Module
more information		Installation Guidelines" on
on valid memory		page 93. If the problem
configurations,		persists, see
please see the		"Troubleshooting System
system		Memory" on page 159.
documentation on
the technical
support web site.

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary at support.dell.com/manuals.

50

About Your System