Dell E05S001 Removing a Hard Drive From a Hard-Drive Carrier, SAS/SATA screw hole Screws

Removing a Hard Drive From a Hard-Drive Carrier

Remove the screws from the slide rails on the hard-drive carrier and separate the hard drive from the carrier. See Figure 3-6.

Figure 3-6. Removing and Installing a Hot-Swap Hard Drive Into a Hard-Drive Carrier

1

4

			2
			3
1	hard drive	2	hard-drive carrier
3	SAS/SATA screw hole	4	screws (4)

Installing a Hard Drive Into a Hard-Drive Carrier

1Insert the hard drive into the hard-drive carrier with the connector end of the drive at the rear. See Figure 3-6.

2Align the screw holes on the hard drive with the back set of holes on the hard-drive carrier.

3Attach the four screws to secure the hard drive to the hard-drive carrier.

82

Installing System Components