Dell E05S001 owner manual Internal USB Memory Key, Installing the Cooling Fan Assembly

Installing the Cooling Fan Assembly

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Orient the cooling fan assembly as shown in Figure 3-1.

2Align the slots on the sides of the cooling fan assembly with the tabs on the chassis. See Figure 3-13.

3Insert the cooling fan assembly into the system and lower the blue release levers to lock it in place.

4Close the system. See "Closing the System" on page 77.

5Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Internal USB Memory Key

An optional USB memory key installed inside your system can be used as a boot device, security key, or mass storage device. The USB connector must be enabled by the Internal USB Port option in the Integrated Devices screen of the System Setup program.

To boot from the USB memory key, configure the USB memory key with a boot image and then specify the USB memory key in the boot sequence in the System Setup program.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 76.

3Locate the USB connector on the control panel board. See Figure 3-29.

104

Installing System Components