Dell E05S001 owner manual 109

5Lift the expansion-card latch and remove the filler bracket. See Figure 3-16.

NOTE: To install an expansion card in the expansion-card connector on the system board, go to step 7.

6Holding the card by its edges, position the card so that the card-edge connector aligns with the expansion-card connector.

7Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated.

8Replace the expansion-card latch. See Figure 3-16.

Figure 3-16. Installing and Removing an Expansion Card

1

	3		2
1	expansion-card latch	2	expansion card
3	expansion-card connector

Installing System Components

109