Dell E05S001 Internal Dual SD Module Optional, Removing the Internal Dual SD Module

Internal Dual SD Module (Optional)

Removing the Internal Dual SD Module

When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of the system setup program, the information is replicated from one SD card to another. See "Integrated Devices Screen" on page 60.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 76.

3If installed, remove the SD cards from the internal dual SD module. See Figure 3-1.

4Disconnect the cable from the internal dual SD module. See Figure 3-22.

5Lift the latch securing the internal dual SD module to the front-chassis assembly and lift the module out of the assembly. See Figure 3-22.

6Close the system. See "Closing the System" on page 77.

7Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Installing System Components

123