Dell E05S001 owner manual Installing the Control Panel Display Module

Installing the Control Panel Display Module

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Insert the display module into the chassis cutout and secure the module with the two Torx screws. See Figure 3-29.

2Attach the replacement panel to the front of the display module.

3Connect the display module cable to the control panel board. See Figure 3-29.

NOTE: Ensure that you release the cable clamp before connecting the cable and then latch the clamp after connecting the cable.

4Close the system. See "Closing the System" on page 77.

5Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

6If applicable, replace the front bezel. See "Installing the Front Bezel" on page 75.

140

Installing System Components