Dell E05S001 owner manual Iscsi KEY connector

1Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.

2Open the system. See "Opening the System" on page 76.

3Locate the ISCSI KEY connector on the system board. See Figure 6-1.

4Insert the NIC hardware key into the connector on the board. See Figure 3-15.

Figure 3-15. Removing and Installing a NIC Hardware Key

1

2

1 NIC hardware key 2 ISCSI KEY connector

5Close the system. See "Closing the System" on page 77.

6Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

106

Installing System Components