Dell E05S001 owner manual Entering the System Setup Program, Responding to Error Messages

Entering the System Setup Program

1Turn on or restart your system.

2Press <F2> immediately after you see the following message:

<F2> = System Setup

If your operating system begins to load before you press <F2>, allow the system to finish booting, and then restart your system and try again.

Responding to Error Messages

If an error message appears while the system is booting, make a note of the message. See "System Messages" on page 38 for an explanation of the message and suggestions for correcting errors.

NOTE: After installing a memory upgrade, it is normal for your system to display a message the first time you start your system.

Using the System Setup Program Navigation Keys

Keys	Action
Up arrow or <Shift><Tab>	Moves to the previous field.
Down arrow or <Tab>	Moves to the next field.
Spacebar, <+>, <–>, left and	Cycles through the settings in a field. In some
right arrows	fields, you can also type the appropriate value.
<Esc>	Exits the System Setup program and restarts the
	system if any changes were made.
<F1>	Displays the System Setup program's help file.

NOTE: For most of the options, any changes that you make are recorded but do not take effect until you restart the system.

54

Using the System Setup Program and UEFI Boot Manager