Dell E05S001 E2110 Multibit, Error on Dimm, ##. Reseat, E2111 SBE log, Disabled on, Dimm ##

Code	Text	Causes	Corrective Actions
E2110	Multibit	The memory module in slot	Reseat the memory
	Error on DIMM	"##" has had a multi-bit	module in its socket.
	##. Reseat	error (MBE).	If the problem persists,
	DIMM.
			see "Troubleshooting
			System Memory" on
			page 159.

E2111 SBE log	The system BIOS disabled
disabled on	memory single-bit error
DIMM ##.	(SBE) logging and will not
Reseat DIMM.	log any more SBEs until the
	system is rebooted. "##"
	represents the memory
	module implicated by the
	BIOS.

Reseat the memory module in its socket.

If the problem persists, see "Troubleshooting System Memory" on page 159.

E2112 Memory spared	The system BIOS spared the
on Card x	memory because it
DIMM ##.	determined that the
Power cycle	memory has too many
AC.	errors.

Remove AC power to the system for 10 seconds and restart the system.

If the problem persists, see "Troubleshooting System Memory" on page 159.

I1910 Intrusion	System cover removed.	Replace the chassis cover
detected.		or ensure the chassis cover
Check chassis		is properly installed. See
cover.		"Closing the System" on
		page 77.

I1911 LCD Log Full. LCD overflow message. A Check SEL to maximum of ten error

review all messages can display

Errors. sequentially on the LCD. The eleventh message instructs the user to check the SEL for details on the events.

Check the SEL for details on the events.

Remove AC power to the system for 10 seconds or clear the SEL.

I1912 SEL full.	The SEL is full of events
Review &	and is unable to log any
clear log.	more.

Check the SEL for more information and then clear the SEL.

36

About Your System