4Remove the cooling fan assembly. See "Removing the Cooling Fan Assembly" on page 102.

5If applicable, remove the cables on the power distribution board.

6Separate the system board and the I/O board to disengage the interconnect between the power distribution board and the I/O board:

a Slightly lift the tab on the high-speed connector to free the release levers. See Figure 3-30.

b Push the release levers at an angle of 90 degrees away from the connector to separate the system board and the power distribution board from the I/O board. See Figure 3-30.

7Press the release tab in the direction of the arrow and slide the board upwards. See Figure 3-28.

8Pull the power distribution board up until the securing slots on the board are free from the tabs on the chassis. See Figure 3-28.

136

Installing System Components

Page 136
Image 136
Dell E05S001 owner manual Installing System Components