Mackie SP1200 user service Service Information, Appendix a Default Settings

Disclaimer

Mackie Industrial continually engages in research related to product improvement, new materials, and production methods. Design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current Mackie Industrial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.

Mackie Industrial and Sound Palette are trademarks or registered trademarks of Mackie Designs Inc.

All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.

© 2001 All Rights Reserved.

Mackie Industrial.

Printed in the U.S.A.

6. Service Information

In the event that your SP1200 should require servicing, please follow these instructions:

1.Call Mackie Industrial Tech Support at 1-888-337- 7404, 8 am to 5 pm PST (Monday-Friday), to verify the problem and obtain a Return Authorization (RA) Number. Be sure to have the serial number of the unit when you call. You must have a Return Authorization Number in order to obtain warranty service at the factory or at an authorized service center.

2.Pack the unit in its original packaging. This is very important. Mackie Industrial is not responsible for any damage that occurs during shipping due to non-conventional packaging. Original packaging helps to minimize the possibility of shipping damage.

3.Include a legible note stating your name, return shipping address, (no P.O. boxes), daytime phone number, Return Authorization Number, and a detailed description of the problem, including how we can duplicate it.

4.Write the Return Authorization Number in BIG BOLD PRINT on the top of the box.

5.Ship the unit to us. We suggest insurance for all forms of cartage. Ship to this address:

Mackie Industrial

Service Department

16140 Wood-Red Road NE, Suite 5

Woodinville, WA 98072

Appendix A: Default Settings

Control	Setting
LOCAL/REMOTE	UP (LOCAL)
PAGING MIC
PHANTOM	UP (OFF)
GAIN +40dB	UP (0dB)
GAIN	CENTER
LOW	CENTER (FLAT)
HIGH	CENTER (FLAT)
	ZONE A
AMP ADDRESS	10000000
MIC/LINE INPUT
GAIN	CENTER
LOW	CENTER (FLAT)
HIGH	CENTER (FLAT)
PHANTOM	UP (OFF)
GAIN +40dB	UP (0dB)
MIC VOX	CLOCKWISE (OFF)
PROGRAM EQ
LOW	CENTER (FLAT)
MID	CENTER (FLAT)
FREQ	CENTER (1kHz)
HIGH	CENTER (FLAT)
INTERNAL BUS
ASSIGN (S1/S2)	OFF

NOTE: All SP1200s sold in the U.S. and Canada are configured for 115 VAC line input and 70V speaker output. All units sold outside the U.S. and Canada are configured for 230 VAC and 100V speaker outputs. Please confirm your configuration prior to installation.

SP1200 – 25