•mono on front — the same as mono on center, above, but the sound is reproduced through all three front speakers.
•
When decoding Dolby Digital™
•Dolby Digital: straight Dolby Digital decoding without further processing.
•Dolby Digital + THX: the same as above, but with the additional
In addition, when decoding DTS™ source material, clicking the Surround mode button will cycle you through the available DTS modes:
•DTS: straight DTS decoding without further processing
•DTS + THX: DTS decoding, plus the additional
7DISPLAY INTENSITY
Pressing the display intensity button will cycle the AVP2’s display through
the four available levels of brightness: high, medium, low, and off. For ex- | 19 |
ample, during bright daytime hours you may wish to use high; in the evening, in a
8RECALL
Pressing the recall button restores the AVP2 to its calibrated reference set- tings for the relative output of all speakers. This is especially helpful after having experimented with various settings of balance, center, rear, or sub, or when comparing a modified surround default to “flat” balance, since one touch of a button will restore your preamplifier to its original state (as de- termined by the setup calibrations stored in memory; see System Setup & Calibration and Using the AVP2 for more details).
9MAIN DISPLAY
The main display provides information pertaining to the operation of the AVP2 including selected source, surround mode, and volume levels. At all volumes above a relatively quiet background level, and in all modes, the volume control enjoys a resolution of 0.5 dB. Thus a change of 9.5 decibels would be indicated by a change of 9.5 in the display.