22
16CENTER
Pressing this button followed by adjusting the volume knob (or volume ± on the remote control) will alter the volume of the Center speaker relative to its normal, calibrated setting. The resulting offset will be indicated in the main display, as well as by the on screen display, until the volume control reverts to its normal, master mode.
As an example, increasing the center channel volume by three decibels would result in a +3.0 being displayed until the volume control reverted to normal operation, at which point the display would again indicate the over- all volume setting.
17SURROUND
Pressing this button once followed by adjusting the volume knob (or volume ± on the remote control) will alter the relative volume of the sur- round speakers relative to all others. The resulting offset will be indicated in the main display, as well as by the on screen display.
If additional surround speakers are defined (either a single back center, or a pair of back speakers), pressing this button a second time will allow you to change the offset of the back channel(s).
18SUB
Pressing this button followed by adjusting the volume knob (or volume ± on the remote control) will alter the volume of the Subwoofer(s) relative to all other speakers. The resulting offset will be indicated in the main display, as well as by the on screen display, until the display returns to its normal, master volume display.
19VOLUME KNOB
This knob is used to make most adjustments on the AVP2. While the vol- ume knob normally controls the master volume of the music/home theater system (main path), it can be used in concert with other buttons to control almost any aspect of system performance (as indicated above), and when navigating the menu system from the front panel.
