SET DIRECT BUTTONS
VCR 1
DISC 1
VCR 2/DISC 2
TV/AUX
SATELLITE
CD
↓TAPE
AUX TUNER
DEFINE BUTTON CD
NAME: CD
TYPE: AUDIO
AUDIO DELAY: O MS
MULTI-CH THX: FORCE OFF
RECORD DEVICE: NO
AUDIO CONNECTORS
CD AUDIO CONNECTORS
AUDIO CONNECTORS: 1 1: DIGITAL 1
renaming source buttons
46
defining the input type
Your first decision: would you like the on screen display to identify your CD transport with something more specific than a generic cd name? If so, enter the characters one at a time, up to a maximum length of seven.
1MOVE THE
A blinking box indicates the first available space for your new name. If you need to move it, press any AVP2 button on the remote other than the usual four you use for navigating menus. The audio button will do nicely, and is conveniently nearby on the remote control.
2USE THE VOLUME ± BUTTONS TO SCROLL THROUGH THE LIST OF AVAILABLE CHARACTERS UNTIL YOU SEE THE ONE YOU NEED
This system works similarly to the titling feature on many camcorders. Avail- able characters include the alphabet, all numbers, and various punctuation marks, including blank spaces for separating words.
3MOVE ON TO THE NEXT CHARACTER BY PRESSING ANY AVP2 BUTTON ON THE REMOTE OTHER THAN THE FOUR YOU USE FOR NAVIGATING MENUS.
As before, the audio button will do nicely, and is conveniently nearby.
4REPEAT UNTIL YOU HAVE THE ON SCREEN NAME YOU WANT THE SYSTEM TO USE; WHEN DONE, PRESS ENTER TO SAVE THE NAME
As always, enter saves a change. If you get part way through the process of changing the name (or any other adjustment in the menu system) and change your mind, you can cancel your changes by pressing menu. This will leave the name unchanged from what it had been before you started.
In the case of setting up your CD transport, defining an input type is pretty simple: it can be either an audio input, or unused. (You should choose the latter for any input buttons that are, in fact, unused in your system. Doing so will re- mind the casual user of the system of this fact when they press the wrong button by accident, by displaying a message on screen: input not used. The main display on the AVP2 will also display not used. The AVP2 will also remove unused inputs from the list when scrolling through availabe inputs using the next or previous input buttons on the remote control.)
