bass level manager

bass level manager menu

3REPEAT THIS PROCESS FOR EACH SPEAKER IN TURN

Pressing volume ± will move the cursor (and the test noise) on to the next speaker. When adjusting the subwoofer level, be sure to get up and walk all around the listening area, watching for the magnitude of the variations in- troduced by room modes at low frequencies. If more than 3-4 decibel variations are seen within the listening area, consider relocating your subwoofers for more consistent results. (See Planning Your Installation for specific suggestions on subwoofer placement.)

4MAKE A NOTE OF THESE SETTINGS UNDER “YOUR SYSTEM SETTINGS” IN THE BACK OF THIS MANUAL

Having these settings handy will prove helpful should anyone ever tamper with your careful calibrations. Of course, you should re-calibrate the system whenever changing amplifiers and/or speakers, or when something has a noticeable effect on room acoustics (such as rearranging the furnishings).

5SAVE ALL YOUR CHANGES AND RETURN TO THE SETUP MENU

Once you have each channel adjusted properly, press menu to return to the set speakers menu so you can continue the initial setup of your system.

Some powered subwoofers have built-in protection against overload, or have am-

 

plifiers designed to be incapable of destroying the subwoofer driver itself. If your

 

system enjoys this sort of protection, leave the Audio Video Preamplifier’s bass

 

level manager at its maximum (and therefore effectively disabled) setting. After

 

all, the speaker designer knows the limitations of his/her product better than ei-

59

ther you or we can. It’s best to let the speaker designer decide.

However, many subwoofers lack any protection against being overdriven other than your own discretion in using the volume control. While this discretion is al- ways a good thing — if your system starts to sound distorted, “fuzzy” or garbled at high volumes, turn it down! — some people might prefer to have the system itself provide a measure of additional protection. This task falls to the bass level manager.

With the advent of discrete multichannel digital audio, it is possible to have six (or more) channels of information that contains deep bass frequencies. In many cases, the only speaker in the system that can reproduce deep bass is a single subwoofer. If one subwoofer is expected to do the work of six speakers, and the listener-controlled volume is turned up fairly high, it is easy to imagine the woofer being taken beyond its limits. (Incidentally, there are significant sonic ad- vantages to having multiple subwoofers when possible, in addition to simply in- creasing the maximum volume that can safely be enjoyed. You may want to con- sider using two subwoofers.)

BASS LEVEL MANAGER

TEST SIGNAL: OFF

TEST/NEW LEVEL: 35.0

SAVED LEVEL: 65.0

Page 58 Page 60
Page 59
Image 59
Madrigal Imaging AVP2 owner manual Repeat this Process for Each Speaker in Turn
Page 58 Page 60

AVP2 specifications

Madrigal Imaging's AVP2 is an advanced multi-channel audio and video processor that has garnered attention for its exceptional performance and innovative features. This state-of-the-art device is designed specifically for high-end home theater systems, providing users with an immersive audio-visual experience.

One of the standout features of the AVP2 is its support for multiple audio formats, including Dolby Atmos and DTS:X. These immersive sound technologies enable users to experience movies and music in three-dimensional audio, allowing them to feel as though they are right in the middle of the action. The AVP2 also supports high-resolution audio formats, making it an ideal choice for audiophiles who demand the best in sound quality.

The AVP2 employs advanced digital signal processing (DSP) technology, which enhances sound clarity and accuracy. With precise calibration and tuning options, users can tailor their audio experience to suit their specific preferences and room acoustics. This DSP technology also enables the AVP2 to deliver superior surround sound, ensuring that every detail of the audio mix is preserved.

For video processing, the AVP2 supports 4K resolution and HDR (High Dynamic Range), allowing users to enjoy stunning picture quality with vibrant colors and enhanced contrast. The processor is equipped with advanced scaling technology that upscales lower-resolution content to near-4K quality, ensuring that all media looks its best.

Connectivity is another key aspect of the AVP2. It features multiple HDMI inputs and outputs, along with various analog and digital audio connections, ensuring compatibility with a wide range of source devices, including Blu-ray players, gaming consoles, and streaming devices. The AVP2 also includes network connectivity options, allowing users to stream content directly from their favorite services.

In addition to its impressive technical specifications, the Madrigal Imaging AVP2 is designed with user-friendliness in mind. Its intuitive interface and remote control provide easy access to all settings and features. Overall, the AVP2 represents a perfect marriage of cutting-edge technology and user-centric design, making it an outstanding choice for anyone looking to elevate their home entertainment setup.
Top Page Image Contents