INSPECTION OF HOSES
1.Visually inspect all | 3. Lift the panel | 4. Using a flashlight if |
hoses prior to each | clear of the | necessary, inspect the gas |
use | column. | delivery hose, and the upper |
of the grill. |
| end of the gas supply hose, |
2. Remove the |
| from this area. |
inspection panel |
| 5. If either hose shows excessive |
located on the rear |
| wear, abrasion, cutting, or |
of column near the |
| other damage, it must be |
top by rotating the |
| replaced prior to using grill, |
locking |
| (the valve and gas delivery |
mechanism. |
| hose is one assembly). Replace |
|
| the hoses only with those |
|
| specified by the manufacturer. |
6. Open the access | 7. Remove the | 8. Using a flashlight if |
panel at the | propane canister | necessary, visually inspect |
bottom rear of | by unscrewing it | the regulator and bottom |
the column. | (counter- | end of the gas supply hose |
| clockwise) from | from this area. |
| the regulator | 9. If the hose shows excessive |
| assembly. | wear, abrasion, cutting, or |
|
| other damage, it must be |
|
| replaced prior to using the |
|
| grill. Replace the hose only |
|
| with one specified by the |
|
| manufacture. |
7
