Manual Code Learning (continued)
Step 4
Flashes 2 Times
Using the RF Marine Remote press the corre- sponding “VOLUME UP” button to assign this function.
The LED will flash 2 times indicating the “VOL- UME UP” button of the radio remote has been programmed. The LED will then turn off and is now ready for the next button to be programmed.
Step 5 | Step 6 |
or
Repeat Step 3 and 4 for the remaining 7 buttons. Each button has a unique LED flash indicator confirming when they have been programmed.
Power On/Off Button | = | 1 | Flash |
Volume Up Button | = | 2 | Flashes |
Volume Down Button | = | 2 | Flashes |
Seek Up Button | = | 3 | Flashes |
Seek Down Button | = | 4 | Flashes |
Mode/SRC Button | = | 5 | Flashes |
Mute Button | = | 6 | Flashes |
To exit programming push the switch on/off 3 times or wait 15 seconds and the system will automatical- ly exit the “Manual Code Learning” mode.
9
