Magnadyne MV1020C owner manual Wiring Instructions, Specifications, Power Harness Wiring

Wiring Instructions

Power Harness Wiring:

The 4-wire harness provides battery and ignition 12 volts as well as a chassis ground. Route the power harness to the point in the vehicle that you will make the connections.

Red Wire: The red wire in the harness should be connected to a +12 volt power wire that is turned on and of by the position of the ignition key.

Yellow Wire: The yellow wire in the harness should be connected to a constant +12 volt wire that is NOT turned on and off by the position of the ignition key.

Black Wire: The black wire in the harness should be connected to the chassis of the vehicle using a ring terminal and self tap- ping screw or bolt and nut.

Blue Wire: Connect to the common trigger wire coming from all door pin switches (+).

Specifications

Supply Voltage: 12V DC, Negative Ground

Current Consumption: 24 Watts Maximum

Fluorescent Dome Light: 3 Watts

Screen Format: 16:9

Resolution: 800 x 600 Pixels

A/V Input: 1

A/V Output: 1

IR Transmitter: Yes

FM Transmitter: Yes

Dimensions (mm): 310 (w) x 310 (d) x 48 (h)

17