USB Storage Device
This unit offers easy playback of JPEG picture files.
Insert the USB storage device into the USB terminal shown below. [USB] ➠ p.24
Note
•The unit recognizes only a USB storage device.
•Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit. (Not supported.)
•A USB storage device is always inserted to this unit directly.
•A USB storage device is not supplied with this unit.
•We do not guarantee that all USB storage devices can be supported by this unit.
•Be sure to keep a backup copy of the original files on your device before you play them back on this unit.We have no responsibilities for damage or loss of your stored data.
•To protect your USB storage device files from being erased place the write protect sliding tab in the protect position.
•When you are ready to remove a USB storage device, at first turn the unit off so it will go into standby mode to avoid any damage to your data and the unit.
•A USB storage device that requires its own driver or the device with a special system such as fingerprint recognition are not supported.
•This unit is not allowed to use the USB storage device which requires an external power supply (500mA or more).
•Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
•Only USB 2.0 is supported.
•Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.
•Up to 255 English characters can be recognized.
•This unit does not support MTP(Media Transfer Protocol).
•This unit supports FAT16 and FAT32 file systems.
•If the file is not supported, an error message appears.
•When the USB storage device is not recognized, try reconnecting it again.
It is recommended that files to be played back in this unit are recorded under the following specifications:
• Upper limit : | 24 Megapixel |
English 27
INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS CONNECTING DEVICES USEFUL TIPS INFORMATION
