Press or to select AUTO PRESET. Press ENTER. The TV/DVD scans all channels and memo- rizes available ones. When scanning is complete, the TV/DVD will go to the lowest available channel auto- matically.
To stop channel scanning before it is finished, press SETUP on the remote.
– CHANNEL SET UP –
ADD / DELETE CH (TV) B AUTO PRESET
3
1
Resetting TV Channels
The TV/DVD may memorize channels when you turn it on the first time. You may reset channels with these steps.
Before you begin, press SELECT to put the
TV/DVD in TV mode. 1 Press SETUP.
2 CHANNEL SET UP will be selected. Press ENTER.
— TV SETUP —
B CHANNEL SET UP
V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF]
Press SETUP to remove the menu.
4
CHANNEL SET UP V-CHIP SET UP
B LANGUAGE [ENGLISH] CAPTION [OFF]
3 Press ENTER to select ENGLISH, ESPAÑOL, or FRANÇAIS. The selected language will flash inside the [ ]. This will be the language of the TV/DVD setup menus.
— TV SETUP —
to select LANGUAGE.
1 Press SETUP.
2 Press or
2-3 1,4
Menu Language, Resetting TV Channels 17
Menu Language
This affects the language of the TV/DVD’s setup menus and
on-screen display terms. It does not alter the language of TV programming, Disc subtitles, etc.
Before you begin, press SELECT to put the
TV/DVD in TV mode.

2-3

Helpful Hints

If you select Spanish or French menus

and need English, press SETUP. Press or to select IDIOMA or LAN- GAGE. Press ENTER repeatedly to select ENGLISH. Then, press SETUP.

The TV/DVD cannot change channels at the Cable Box or Satellite Receiver. Set the TV/DVD to channel 3, 4, or AUX. Change channels at the Cable Box/Satellite Receiver. See page eight.

If the power fails, you may have to reset the TV channels.

You cannot set up TV channels if the unit is in DVD mode.

Page 17
Image 17
Magnavox 20MDRF20 owner manual If you select Spanish or French menus