Magnavox 20MDRF20 Digital Stereo Hookups, See, To Stereo’s Coaxial Digital Audio in jack

10 Digital Stereo Hookups

You can connect the TV/DVD to a Stereo that has a Digital Coaxial In jack. Use this hookup if you want to hear the TV/DVD sound through the Stereo instead. Use these connections for a Dolby Digital-compatible Stereo or for a Receiver that has a Mini-Disc or Digital Audio Tape deck.

1 Connect the antenna/Cable TV signal as usual. See page eight.

2 Connect a digital audio coaxial cable (not supplied) to the orange COAXIAL Out jack on the rear of the TV/DVD.

Connect the same cable to the Stereo’s COAXIAL DIGITAL AUDIO IN jack.

3 If the Stereo is Dolby Digital-com- patible, set DOLBY DIGITAL to ON. If the Stereo is not Dolby Digital- compatible or if you connected to a Mini-Disc or Digital Audio Tape Deck, set DOLBY DIGITAL to OFF.

See page 41.

An incorrect setting causes noise distor- tion and damages speakers.

To see if your Stereo has Dolby Digital, look for a Dolby Digital logo on your Stereo. Or, refer to the Stereo manual.

Digital Audio Coaxial cable

to orange

COAXIAL Out jack

on TV/DVD

COAXIAL

To Stereo’s COAXIAL

DIGITAL AUDIO IN jack

Helpful Hints

•You cannot use a Mini-Disc or Digital Audio Tape deck to copy 5.1 channel Dolby Digital sur- round sound Discs.

•Discs recorded in Dolby Digital should show this on the Disc or case. If the Disc is not recorded in 5.1 channel Dolby Digital sur- round sound, you will not hear multi-channel sound even if you use the Digital Stereo hookup.