![](/images/new-backgrounds/1200717/20071745x1.webp)
Sound
Before you begin:
You must set Home in Location. ➠ p. 29
Otherwise, personalized picture and sound settings will not be memorized after the unit goes into Standby mode.
1Press and use ▲▼◄► to select Setup, then press OK.
2 Use ▲▼ to select Sound, then press OK.
Picture | Auto sound | Personal |
Sound | Equalizer | Start now |
Features | Balance |
|
Installation | Digital audio language | English |
Software | SRS TruSurround XT | On |
| AVL | Off |
23
Digital TV operation
You can select the Audio language while your TV is receiving the Digital broadcasting.
Digital audio | to select the language according to your preference. |
language | (It differs depending on the program.) |
Analog/Cable TV operation
You can select Main or SAP while your TV is receiving the Analog broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
Alternate audio | Main | to output | |
|
| ||
SAP | to output | ||
| |||
|
|
|
Analog/Cable TV operation
When you set to Main in Alternate audio above, you can select Mono or Stereo if the Analog broadcasting is sending the MTS (Multichannel television sound).
English
TV speakers | On |
Mono/Stereo
Mono to output
Delta volume |
3Use ▲▼◄► to select the item you want to adjust, then press OK.
The following sound settings can be configured. Depending on the format of the broadcasting, some sound settings are not available.
| to select the desired setting | |
| (Personal, Standard, Vivid, Sports, Movie, Music and | |
Auto sound | News) | |
When you adjust the following settings (Equalizer, | ||
| ||
| SRS TruSurround XT and AVL), Personal will be set | |
| automatically. |
Adjust the tonal quality for each frequency.
| Cursor ◄ | Cursor ► |
Equalizer | to adjust the each level of tonal quality | |
| Press BACK to go back to the previous menu. |
Adjust the speakers to suit your listening preference.
Balance | Cursor ◄ | Cursor ► | |
to adjust the balance of the right and left speakers | |||
| |||
|
|
|
Stereo to output
This selects sound modes for more spatial or surround sound reproduction.
SRS TruSurround | Off | to set SRS TruSurround XT® to Off |
XT | On | to set SRS TruSurround XT® to On |
|
|
|
This function keeps a constant loudness differential between the TV commercials and the programs.
AVL | Off | to remove the auto volume leveling |
|
| |
On | to reduce volume differences between the | |
| TV commercials and the programs | |
|
| |
|
|
|
You can select the Audio Output from the unit’s speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit’s remote control. Make sure
| Off | not to output sound from the unit’s | |
| speakers | ||
|
| ||
|
|
| |
TV speakers | On | to output sound from the unit’s speakers | |
|
| ||
CEC Link | to control Audio Output from your | ||
| |||
| connected | ||
|
| with VOL + / − by using this unit's remote | |
|
| control. |
If a channel or Input device is too loud or too soft, navigate to that channel or Input device.
| Cursor ◄ | Cursor ► |
Delta volume | to set a negative delta | to set a positive delta |
| volume level as per your | volume level as per your |
| personal preferences | personal preferences |
Note
••Alternate audio and Mono/Stereo are not available when you watching TV programs with a cable box or satellite