FEATURE MENU CONTROLS (CONTINUED)
ADD/DELETE CHANNELS
channels it can find (on your Antenna or Cable TV system) into the TV's memory. Add/Delete Channels makes it easy for you to add other channels, or drop unwanted channels, from the list of channels in the TV's memory.
BEGIN
1Select CHANNEL MEMORY (ADD/DELETE CHANNELS) control.
With the FEATURES MENU on screen, move the RED highlight with the outer MENU ring 
buttons. Then press the center MENU button to select the feature.
2Press the CHANNEL ▲▼ or number buttons to select the channel you want to add or delete.
3Press the outer MENU ring button (on the Right) to
ADD the channel into the TV's memory.
Press the outer MENU ring button (on the Left) to DELETE the channel from memory.
Repeat steps 2 and 3 for each channel you wish to add or delete.
4Press the STATUS or MENU button to clear the screen when through.
STOP
SMART HELP
Remember. You can also 
add the Auxiliary modes
(AUX 1 VIDEO, AUX 1 Y PB PR, etc.) just like a channel. Then by pressing the CHANNEL ▲▼ buttons the AUX(iliary) mode can quickly be selected to use the desired set of Input jacks (see page 33).
Note: AUX(iliary) VIDEO modes are located between the lowest and highest channel numbers within the ADD/DELETE CHANNEL control screen.
MAIN MENU |
| |
PICTURE |
| SOUND |
FEATURES |
| HELP |
1ST TIME SETUP | EXIT | |
AV | POWER |
|
GUIDE INFO
| TV | VCR | ACC | 1 |
|
| SWAP | PIP CH | SOURCE |
| |
|
| DN UP |
|
| |
4 | SLEEP |
| AUTO |
|
|
|
|
|
|
| |
| STATUS/ |
| MENU/ |
|
|
| EXIT |
| SELECT |
|
|
| VOL |
| CH | 1 | 3 |
|
| MUTE |
|
|
|
| 1 | 2 | 3 |
|
|
| 4 | 5 | 6 |
| 2 |
| 7 | 8 | 9 |
| |
|
|
| |||
| 100+ | 0 | SURF |
|
|
| POSITION | PIP |
|
| |
FEATURE MENU |
|
PICTURE | CABLE |
SOURCE | TUNING |
CLOSED | CHANNEL |
CAPTIONS | MEMORY |
EXIT | MORE... |
| 1 OF 5 |
CHANNEL MEMORY |
|
ADD/DELETE |
|
CHANNELS |
|
START |
|
| |
EXIT | HELP |
ADD/DELETE CHANNEL
Channel 19 Added for ANT A
SELECT CHANNEL
to DELETE CHANNEL
A
B for ANT B
M 
when FINISHED
NOTE: A separate ADD/DELETE CHANNEL memory may also be created for the ANT(enna) B Input on the rear of the set (if an Antenna or Cable TV signal has been connected). Press the “AV” button on the remote, while in the ADD/DELETE CHANNEL mode, to switch between the ANT A and ANT B channel memory lists. Then follow steps 2 and 3 as shown to the left to add or delete the desired channels.
14
