Magnavox CD130MW8 owner manual Initial Setting, TV Functions, 5Initial Setup, 5Main Menu

INITIAL SETTING

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

TV Functions

INTRODUCTION

5Initial Setup

This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and “AUTO PRESET CH”, which automatically scans and memorizes viewable channels.

Before you begin:

Make sure if the unit is connected to antenna or cable.

1After making all the necessary connections, press

[STANDBY-ONy]to turn on the unit.

STANDBY-ON

• This operation may take a few moments.

2Use [VOL. X/Y] or [CH. K] to select the on-screen language from the choices on the left side of the TV screen. (ENGLISH / ESPAÑOL / FRANÇAIS)

	--- LANGUAGE/IDIOMA/LANGUE ---
	ENGLISH	PRESS	VOLY
or	ESPAÑOL	PRESIONE VOLX
	FRANÇAIS	PRESSEZ	CH. K

•Press [VOL. Y] for English.

•Press [VOL. X] for Spanish.

•Press [CH. K] for French.

3Use [VOL. X/Y] to select “AUTO PRESET CH(TV/DTV)” for TV channels or “AUTO PRESET CH(CATV)“ for CATV channels, then press [CH. K].

-INITIAL SETUP -

1.PLEASE CONNECT ANTENNA OR CABLE OR SATELLITE TO THIS UNIT.

2.SET UP THE ITEMS WITH

VOL / , AND CHBUTTONS.

AUTO PRESET CH (TV/DTV)

AUTO PRESET CH (CATV)

•Scanning and memorizing the channels automatically start.

CH 25

AUTO PRESET CH(TV/DTV)

Note:

•If you connect the cable system directly, contact the CATV installer.

•If you press [STANDBY-ONy]or [SET-UP]during “AUTO PRESET CH”, this setting will be canceled.

•The initial auto channel scan function can be executed for either TV/DTV or CATV only once. If you want to scan both TV/DTV and CATV, you need to select “CHANNEL SETUP” in the main menu to scan and memorize other channels after initial presetting is completed. (Refer to page 12.)

•You can cancel or exit the initial “AUTO PRESET CH” menu by pressing [SET-UP].

•When no channel can be received by “AUTO PRESET CH”, “NO TV SIGNALS” is displayed on the TV screen.

•If there is no signal input from the antenna terminal and no operation for more than several seconds after you turn on the unit, “HELPFUL HINTS” appears. Follow the instructions listed on the TV screen.

--- H E L P F U L H I N T S ---

1 . P L E A S E C H E C K T O S E E I F T H E A N T E N N A / C A B L E /

S AT E L L I T E I S P R O P E R LY C O N N E C T E D .

2 . D I D YO U P E R F O R M

” A U T O P R E S E T C H ” ?

3 . P L E A S E R E F E R T O F R O N T PA G E O F T H E O W N E R ’ S M A N U A L O R R E A R PA N E L F O R S U P P O R T L I N E

I N F O R M AT I O N .

5Main Menu

This section describes the overview of the main menu displayed when you press [SET-UP].

For more details, see the reference page for each item.

The main menu consists of the function setting items below.

Press [SET-UP]to display the main menu.

e.g.) digital TV mode

--- TV SETUP ---

CHANNEL SETUP

V-CHIP SETUP

LANGUAGE [ENGLISH]

CAPTION [OFF]

DTV SETUP

• CHANNEL SETUP

You can automatically scan the viewable channels and remove those that are undesired.

(Refer to “Auto Channel Scan” on page 12.)

•V-CHIP SETUP

You can set the viewing limitations. (Refer to “V-chip” on page 19.)

•LANGUAGE

You can change the language (English, Spanish or French) displayed on the main menu.

(Refer to “Language Selection” on page 12.)

CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION

• When the scanning and memorizing are completed,	• CAPTION
	You can change the display format for closed caption,
the lowest memorized channel in the broadcasting
	which displays the dialogue of a TV program or other
will be displayed.
	information across the TV screen.
	(Refer to “Closed Caption” on page 17.)
	• DTV SETUP
	You can set the screen display or caption in the DTV
	mode. (Refer to “DTV Closed Caption” on page 18.)

ESPAÑOL

11

EN