Magnavox CD130MW8 Entered channel number, Changes automatically, For analog broadcasts

Symptom	Remedy
The entered channel number	• Many digital channels have alternate channel numbers. The unit changes the numbers
changes automatically	automatically to the ones signifying the broadcasting stations. These are the numbers used
	for analog broadcasts.
Remote control does not work	• Check the antenna or cable connection to the main unit.
	• Check the batteries of the remote control.
	• Check if there is an obstacle between the sensor and the remote control.
	• Test the signal output. If OK, then possible remote sensor trouble.
	(Refer to “IR Signal Check” on page 40.)
	• Aim the remote control directly at the sensor on the front of the unit.
	• Reduce the distance to the unit.
	• Re-insert the batteries with their polarities (+/– signs) as indicated.

T		Problems with Closed Caption Feature
V	Misspelled captions are dis-	• Closed captioning production companies may broadcast programs without cor-
	played.	recting the misspelling in a live broadcast.
	Captions are not entirely dis-	• Captions that are delayed a few seconds behind the actual dialogue are common for live
	played, or captions are delayed	broadcasts. Most captioning production companies can display a dialogue to a maxi-
	behind the dialogue.	mum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to
		insure that the captions remain up-to-date with the current TV screen dialogue.
	Captions are displayed as a	• Interference from buildings or weather conditions may cause captioning to be
	white box.	incomplete.
	No caption is displayed in the	• Broadcasting station may shorten the program to insert advertisement. The closed
	Closed Caption-supported	caption decoder cannot read the information of the shortened program.
	program.
	Black box is displayed in the	• “Text” mode is selected for caption. Select “CAPTION1”, “CAPTION2” or “OFF”.
	TV screen.
	Completely distorted picture	• Make sure the disc is compatible with the unit.
	or black/white picture with
	DVD
	Picture freezes momentarily	• Check the disc for fingerprints/scratches and clean with a soft cloth wiping from
	during playback.	center to edge.
	Disc cannot be played back.	• Clean the disc.
		• Ensure the disc is correctly inserted.
		• Check if the disc is defective by trying another disc.
		• Cancel the parental lock or change the control level.
D		• Insert a correct disc that can be played back on this unit.
		• Handle a disc with special care so that it does not have fingerprints, scratches, or
V		dusts on its surface.
	Buttons do not work or the	• To completely reset the unit, unplug the power cord from the power outlet for
D	unit stops responding.	5-10 seconds.
	The unit does not respond to	• Operations may not be permitted by the disc. Refer to the instructions of the disc.
	some operating commands
	during playback.
	Angle does not switch.	• The angle cannot be switched for DVD which do not contain multiple angles. In
		some cases multiple angles are only recorded for specific scenes.
	Playback does not start	• Check the “PARENTAL” setting.
	when the title is selected.
	The password for rating level	• Enter the default password “4737”, then your forgotten password will be cleared.
	has been forgotten.

Note:

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

•Playback from a desired track and random playback are not available during programed playback.

•Some functions are prohibited on some discs.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION ESPAÑOL

39

EN