Magnavox CD130MW8 owner manual Black Level Setting, Virtual Surround, Stereo Sound Mode

OPERATING DVD

Black Level Setting

DVD

Adjust the black level to make the dark areas of the TV picture brighter.

1During playback, press [MODE] repeatedly until ““ appears.

2Use [Cursor K/ L] to adjust the black level.

or OFF (BLACK LEVEL)

ON : Makes the dark areas brighter.

OFF : Shows the original picture as recorded.

3Press [RETURN] to exit.

Virtual Surround

You can enjoy virtual surround on your existing 2 channel stereo system.

1During playback, press [MODE] repeatedly until ““ appears.

2Use [Cursor K/ L] to select the sound level.

or 1 (SURROUND)

1: Natural effect

2: Emphasized effect

OFF : No effects (original sound)

3Press [RETURN] to exit.

Note:

• The setting will be kept even if the unit is turned off.

Stereo Sound Mode

CD

This unit allows you to select a sound mode during audio CD playback.

1During playback, press [MODE] repeatedly until “” appears.

2Use [Cursor K/ L] repeatedly until the desired sound mode appears.

or STEREO (AUDIO)

•Each time you press [MODE], the sound mode changes as example below.

STEREO (mixed sound of left and right channels)

L-ch(left channel sound only)

R-ch(right channel sound only)

Note:

•Virtual surround cannot be changed when the sound mode is set to either “L-ch” or “R-ch”.

30

Note:

•The setting will be kept even if the unit is turned off.

•For audio CD, virtual surround will not be effective if the sound mode is set to something other than “STEREO”. See “Stereo Sound Mode”.

•Turn down the level or select “OFF” if the sound is distorted.

EN