Magnavox CD130MW8 Marker Setup, To select a desired marker, repeat steps 1 to 3, To set a marker

Marker Setup

This feature allows you to assign a specifi c point on a disc to be called back later.

To set a marker

1During playback, press [MODE] repeatedly until “” or “” appears.

e.g.) DVD

/12 (SEARCH)

2Use [Cursor K/L] repeatedly until maker search menu

appears.

e.g.) DVD

or

3Use [Cursor s / B] to select an available marker within 60 seconds.

e.g.) DVD

or

4When the playback reaches the point at which you want to set a marker, press [ENTER].

• Marker is now set.

e.g.) DVD

5Press [RETURN] to exit.

		INTRODUCTION
1 To select a desired marker, repeat steps 1 to 3 in		CONNECTION
To return to the marker later
“To set a marker“.		INITIALSETTING
	e.g.) DVD
2 Press [ENTER] at the desired marker to start playback
from the specific point which you set.		WATCHINGTV
	e.g.) DVD
Note:		OPTIONAL
• You can mark up to 10 points.
• Marker search menu will disappear in about 60 seconds
when there is no input.		SETTING
• Ejecting the disc or turning off the power will erase all mark-
• To clear a marker, select the marker to be cleared, and then
press [CLEAR].
ers.
		OPERATINGDVD
• Selecting “	” at step 3 in the section “To set a marker”
will also erase	all markers.
		DVD SETTING
		TROUBLESHOOTING
		INFORMATION
		ESPAÑOL

31

EN