Magnavox CD130MW8 owner manual 5DVD Menu, 5Resume Playback, Pause, Press OPEN/CLOSE a

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

INTRODUCTION

5Playback

Before you begin:

Turn on the amplifi er and any other device which is connected to this unit. Make sure the external audio receiver are set to the correct input mode.

1Press [STANDBY-ONy]to turn on the unit.

STANDBY-ON

Note:

• “” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

•Some DVD may start playback from title 2 or 3 due to specific programs.

•During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

CONNECTION INITIAL

2Press [OPEN/CLOSE A].

•The unit switches to the DVD mode when the unit was in TV mode.

3Insert a disc with its label side facing up.

Align the disc to the disc tray guide.

5DVD Menu

DVD

Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD.

Press [DISC MENU] to call up the disc menu, or press [TITLE] to call up the title menu.

Use [Cursor K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]).

Note:

•Menu operations may vary depending on the disc.

Refer to the manual accompanying the disc for more details.

SETTING WATCHING TV OPTIONAL SETTING

•In case the DVD was recorded on both sides, make sure the side you want to play back is facing up.

4Press [PLAY B]. The tray will close and playback will start.

5Resume Playback

Press [STOP C] during playback. Resume message will appear on the TV screen.

Press [PLAY B]. Playback will resume from the point at which playback was stopped.

Resume ON

Press 'PLAY' to play from here. To play the beginning,

press 'STOP' first and then 'PLAY'.

OPERATING DVD DVD

•If playback does not start automatically, press [PLAY B] again.

5Press [STOP C] to stop playback temporarily.

•If playback remains stopped for 5 minutes, the screen saver program will activate automatically,

and in 15 minutes with no activity at the unit, the unit will turn off when “AUTO POWER OFF“ is set to “ON“ (factory default).

6Press [OPEN/CLOSE A] to eject the disc.

Note:

•To cancel resume, press [STOP C] one more time in the stop mode. On some discs, [STOP C] will not work while the resume message appears. Please wait until the message disappears.

•The resume information will be kept even when unit is turned off. However, opening the disc tray will cancel the resume fea- ture. Playback will start at the beginning the next time you insert the disc.

5Pause

Press [PAUSE F] during playback.

• Playback will be paused and sound will be muted.

To continue playback, press [PLAY B].

SETTING TROUBLESHOOTING INFORMATION ESPAÑOL

23

EN