Magnavox DV225MG9 Satellite Link, Copying a Cassette Tape, Vcr Functions, external tuner

Satellite Link

You can set the unit to start recording whenever it detects a video signal from the external tuner.

VCR FUNCTIONS

Preparing for the Satellite Link Timer Recording:

Preparation on the tuner

•Satellite link accepts only the connection from L1 (rear) with the external tuner. (The connection from L2 cannot read any signals from the external tuner.)

•The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/video signals when it comes to the time you want to finish recording. Refer to the tuner’s manual on how to set the timer.

•Make sure to turn off the tuner when you finish setting.

VCR

1

Press [SPEED] to select the desired tape speed.

SPEED

Tape speed

Recording / playback

time

Type of tape

T60

T120

T160

SP

SP mode

1hour

2hours

2-2/3hours

SLP mode

3hours

6hours

8hours

2

In stop mode, press [SETUP]

SETUP

3

Select “SATELLITE LINK”.

TIMER PROGRAMMING

- M E N U -

Then press [B] to go to next step.

B SATELLITE LINK

AUTO REPEAT

[OFF]

CLOCK SET

or

LANGUAGE SELECT

4

Set the desired start hour.

SATELLITE LINK

Then press [B] to go to next step.

1 2 : 0 0

AM

or

•The hour can be selected from 1-12 with AM or PM.

•When the external tuner signal is stopped, recording will be stopped.

Preparation on this unit

				L1
				external tuner
	DVD		DVD/VCR	VCR
DIGITAL	AUDIO	S-VIDEO	AUDIO OUT	AUDIO IN
AUDIO OUT	OUT	OUT	L	L
		Y
	L	C /
			R	R
COAXIAL		P
	R		VIDEO OUT	VIDEO IN

C /

P

RCA audio/video cables

Note:

• Please purchase the necessary cables at your local store. (Refer to page 7.)

5	Set the desired start minutes.	SATELLITE LINK
	If you wish to go back to the left, press [s]
		0 1	: 0 0	PM
	or
6	Press [B] to set satellite link standby mode.	SATELLITE LINK
		0 1	: 3 0	PM
			[ON]

•TIMER REC indicator on this unit lights up and the unit goes to the DVD mode. If you do not use DVD function, turn off the unit.

•Satellite unit must be turned on for VCR satellite link to start.

If an external tuner is not set to output signals, satellite link will remain in standby mode.

To cancel the satellite link function in standby mode:

Press [TIMER SET] on the remote control or [STOP/EJECT C A] on this unit.

To cancel the satellite link function while the satellite link recording is in progress:

Press [STOP/EJECT C A] on this unit.

Note:

•If you have not set the clock, “CLOCK SET” menu will appear at step 2. Refer to “Clock Setting” on page 8.

•You cannot set the ending time for the satellite link timer recording on this unit.

•Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.

•When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.

e.g.) In case of the satellite link timer recording is overlapped	e.g.) In case of the timer recording is programmed in the middle	e.g.) In case of the timer recording is overlapped on the existing
on the existing timer recording.	of the satellite link timer recording	satellite link timer recording.
timer recording	timer recording	timer recording
satellite link	satellite link	satellite link
recording result	recording result	recording result

Copying a Cassette Tape

Warning: Unauthorized recordings of copyrighted cassette tapes may be an infringement of copyright laws.

1)Insert a pre-recorded cassette tape into another external device for playback.

2)Insert a recordable cassette tape into this unit for recording.

3)Press [SPEED] on the remote control to select recording speed (SP or SLP).

4)Press [INPUT] on the remote control to select L1 or L2. Choose L1 if device is connected to rear input jacks, or L2 if connected to the front. Refer to “ Front & Rear Terminals” on page 9 for more details.

5)Press [RECORD] on the unit.

6)Press “PLAY” button on the external device.

7)To stop recording, press [STOP/EJECT C A] on this unit, then stop playback of the external device.

output jacks of		rear of the unit
external device	L1

AUDIO OUT	RCA audio/video
or		L	L
L		DVD/VCR	VCR
		AUDIO OUT	AUDIO IN
R	cables	VIDEO OUT	VIDEO IN
VIDEO OUT
		R	R

You can use a video disc player, cable/satellite box or other audio/video component with audio/video output jacks.

Note:

•For best results during dubbing, use buttons on this unit whenever possible. The remote control might affect another device’s operation.

•Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended.

•L2 input jacks are on the front of this unit.

•Please purchase the necessary cables at your local store. (Refer to page 7.)

14

EN