Speaker Setting (Available when you have HDMI cable connected to HDMI OUT jack)

This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the most of its feature, set up your speakers appropriately by referring to the following table.

How to navigate through “HDMI Multi(LPCM)”:

1)Use [K/L] to select your desired menu item then press [OK].

2)Use [K/L] to select your setting items.

•Press [RETURN] to go back to the previous screen.

3)Use [s/B] to select desired options. (Except for “Test Tone”, “Default” and setting options in “Speaker Size” setting.)

For setting options in “Speaker Size” setting: Press [OK] to select desired options.

For “Test Tone”:

Use [s/B] to select “Off”, “Manual” or “Auto”, then press [OK].

•The test tone will be output. If you select “Manual”, use [K/L] to select desired speaker, then use [s/B] to adjust the volume. If you select “Auto”, use [s/B] to adjust the volume of the speaker that outputs the test tone.

•If you want to stop the test tone, press [RETURN].

Front speaker (left)

Front speaker (right)

 

Center speaker

 

Subwoofer

Surround

Surround

speaker (left)

speaker (right)

Surround

Surround

back speaker

back speaker

(left)

(right)

e.g.) basic layout with 7.1-channel surround system

For “Default”:

Press [OK] to reset to the default.

4) Press [SETUP] to exit.

<Speaker setting for the audio signal output from HDMI OUT jack>

Quick BHDMI Audio Out BHDMI Multi(LPCM)

Custom BAudio BHDMI Audio Out BHDMI Multi(LPCM)

Menu

Setting items

Descriptions

Speaker Size

Front

Large:

Selects the desired speaker to

Center

For the large speakers with strong

set. Then change the setting by

Subwoofer

low frequency reproduction

referring to the descriptions.

capabilities.

Surround

 

Small:

 

Surround Back

 

For the small speakers which do

 

 

 

 

not provide strong bass sound.

 

 

You cannot change the setting of

 

 

“Subwoofer”. Speakers which are

 

 

not supported by the connected

 

 

device will be displayed in gray.

 

Default

Select “Default”, then press [OK]

 

 

to reset

 

 

“Speaker Size” setting to the

 

 

default.

30