FUNAI MBP5120F/F7 manual 31

Menu	Setting items	Descriptions
Channel Level	Test Tone:	Select “Off” to deactivate “Test
Tests or sets the volume for each	“Test Tone” is the test tone which	Tone”. Select “Manual”, then press
speaker.	can be output from the speakers	[OK] to manually set the volume for
	so you can adjust the volume for	the desired speaker.
	each speaker.	Select “Auto”, then press [OK] to
		automatically output the test tone
		from each speaker.
	Front Lch	If you have selected “Manual” in
	Center	“Test Tone”, select the desired
	Subwoofer	speaker to set and adjust the
		volume for the selected speaker. If
	Front Rch
		you select “Auto” in “Test Tone”, test
	Surround Rch
		tone will automatically be output
	Surround Back Rch
		in order. Adjust the volume of the
	Surround Back Lch	speaker that outputs the test tone.
	Surround Lch
	Default	Select “Default”, then press [OK] to
		reset “Channel Level” setting to the
		default.
Delay Time	Distance	Set the desired measure system.
This is a parameter for optimizing		This measure system will be used
the timing at which the sound		for “Delay Time” setting.
outputs from the speakers		Press [OK] to switch the settings.
according to the distance from	Front	Select the distance from the
the listening position.	Center	listening position to the speaker to
	Surround	get the ideal delay time.
	Surround Back
	Default	Select “Default”, then press [OK] to
		reset “Delay Time” setting to the
		default.

•For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and “Surround Back” to “Large”.)

•For “Delay Time”, the difference between the value of the “Front”, “Surround” and “Surround Back” setting cannot exceed 15 ft (4.5m), and the difference between the value of the “Front” and “Center” setting cannot exceed 5 ft (1.5m).

•For “Delay Time”, the value of the “Center”, “Surround” and “Surround Back” setting cannot exceed the value of the “Front” setting.

•For “Delay Time”, the setting of “Center”, “Surround” and “Surround Back” will be changed automatically to the setting value of the “Front”. (e.g. If the “Front” is set to 60ft (18m), the setting of “Center”, “Surround” and “Surround Back” will be changed to 60ft (18m) as well.)

31