a)Use [K/L] to select “Proxy Address”, then press [OK]. Proxy address setting screen will appear. Enter proxy address.
•The keyboard screen will appear.
Others |
|
|
|
|
|
|
|
| |
Proxy Address |
|
|
|
|
|
| |||
_ |
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
a | b | c | d | e | f | g | h | i | j |
k | l | m | n | o | p | q | r | s | t |
u | v w x y z | . | - | _ | OK | ||||
Clear |
| All Clear | a/A/@ |
| OK | ||||
[K/L/s/B] : | Move the highlight. | ||||||||
[the Number buttons] : Enter number. |
|
| |||||||
[OK] : | Enter the highlighted number/ | ||||||||
| word. |
|
|
|
|
|
| ||
[RED] : | Clear the entered number or | ||||||||
| word. |
|
|
|
|
|
| ||
[GREEN] : | Clear all the entered numbers | ||||||||
| or words. |
|
|
|
| ||||
[BLUE] : | Switch between abc ? ABC ? @!? | ||||||||
[YELLOW] : | Set the entered number or | ||||||||
| word. |
|
|
|
|
|
| ||
b)After you enter proxy address correctly, press [YELLOW].
•Confirmation message will appear. Select “Yes” to complete the settings.
Others
Proxy Address
Is Setting OK? xxxxx
No
Yes
c)Use [K/L] to select “Proxy Port” , then press [OK]. Proxy port setting screen will appear. Enter proxy port number with number buttons.
Others
Proxy Address
Please select the input Proxy Port. then press `OK’
xxxxx
d)After you enter proxy port correctly, press [OK].
2. Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.
Note
• The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)
•For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.
Connection Speed
You can set connection speed as your preference. (The default setting is “Auto”.)
1.Press [OK] to show the options for “Connection Speed”.
2.Use [K/L] to select the desired setting, then press [OK].
“Auto”:
Set the appropriate connection speed automatically, in accordance with your network environment.
“10BASE Half”:
Set the connection speed to “10BASE Half”.
“10BASE Full”:
Set the connection speed to “10BASE Full”.
“100BASE Half”:
Set the connection speed to “100BASE Half”.
“100BASE Full”:
Set the connection speed to “100BASE Full”.
3.Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.
Note
•Choose a connection speed in accordance with your network environment.
•The network connection may be disabled depending on the device, when the settings are changed.
You can limit Internet access for
1.Press [OK] to show the options for
2.Use [K/L] to select the desired setting, then press [OK].
“Allow”:
Internet access is permitted for all
“Limited Allow”:
Internet access is permitted only for BD- Live contents which have content owner certificates. Internet access without the certificates is prohibited.
“Prohibit”:
Internet access is prohibited for all
3.Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.
MAC Address
You can check the MAC address of this unit. “MAC Address” is for viewing only.
Wireless
If you connect this unit to the network wirelessly, select “Wireless” and set up necessary settings.
38