1.Follow steps 1 to 2 in “Easy (Wired)” on page 36.
2.Use [K/L] to select “Custom”, then press [OK].
-Setting menu of “Custom”(wired) will be displayed.
3.Use [K/L] to highlight the item you want to set.
• ”MAC Address” is for viewing only and cannot be selected.
4.Find the instruction for the item from the following, and set the item.
IP Address Setting / DNS Setting
1.Press [OK] repeatedly to select the desired setting.
“Auto(DHCP)” : If your router has DHCP server function, select “Auto(DHCP)”.
“Manual” : If your router does not have DHCP server function, select “Manual”.
If you select “Manual”, follow the following instruction to set the IP address and DNS.
a)Use [K/L] to select “IP Address”, “Subnet Mask” or “Default Gateway”, then press [OK]. IP address setting screen will appear. Enter IP address, subnet mask and default gateway with cursor buttons and number buttons.
Others
IP Address Setting
IP Address
xxx . xxx . xxx . xxx
Subnet Mask
xxx . xxx . xxx . xxx
Default Gateway
xxx . xxx . xxx . xxx
then press ‘OK’
•Enter the IP address number after checking the specifications of your router.
•If the IP address is unknown, check the IP address of other devices. (e.g. PC connected via LAN cable) and assign a different number from those of other devices.
b)After you enter all correctly, press [OK].
•Confirmation message will appear. Select “Yes” to complete the settings.
Others
IP Address Setting
Is Setting OK? |
|
IP Address | xxx.xxx.xxx.xxx |
Subnet Mask | xxx.xxx.xxx.xxx |
Default Gateway | xxx.xxx.xxx.xxx |
No |
|
Yes |
|
|
|
c)Use [K/L] to select “Primary DNS” or “Secondary DNS”, then press [OK]. DNS setting screen will appear. Enter primary DNS and secondary DNS with cursor buttons and number buttons.
Others
DNS Setting
Primary DNS
xxx . xxx . xxx . xxx
Secondary DNS
xxx . xxx . xxx . xxx
then press ‘OK’
•Enter the DNS addresses provided by your Internet provider.
•If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable) and assign the same DNS address.
d)After you enter all correctly, press [OK].
•Confirmation message will appear. Select “Yes” to complete the settings.
2.Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.
Note
•The range of input numbers is between 0 and 255.
•If you enter a number larger than 255, the number will automatically be 255.
•The manually entered addresses will be saved even if you change the setting to “Auto(DHCP)”.
•When you enter a wrong number, press [CLEAR] to cancel. (The number will be back to “0”.)
•If you want to enter 1 or 2 digit number in one cell, press [B] to move on to the next cell.
•If the entered IP address or the default gateway or primary DNS addresses is same as the default setting, IP address setting will be set to “Auto(DHCP)”. (The manually entered number will be saved.)
•When IP address setting is set to “Manual”, the setting of DNS setting will automatically be “Manual” and when IP address setting is set to “Auto(DHCP)”, you can set either “Auto(DHCP)” or “Manual” for DNS setting.
Proxy Setting
1.Press [OK] repeatedly to select the desired setting.
•For default settings, select “Do Not Use”.
•If you need to change the proxy setting as instructed by your Internet service provider
to set the designated proxy address and port, select “Use”.
If you select “Use”, follow the following instructions to set the proxy address and proxy port.
37