Magnavox MC132DMG, MC192DMG owner manual Counter will appear on the screen, Setting will be lost

MC132DMG/MC192DMG 3/22/02 1:21 PM Page 40

40 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

Press the STATUS/EXIT button. The real-time
2 counter will appear on the screen.
01:08 PM	STOP
CH10
SLP	1 : 23 : 45

3 While the counter remains on the screen, press the CLEAR button to reset the real-time counter to zero.

0 : 00 : 00

4 While the counter remains on the screen, press the MEMORY button so that M appears on the screen. To erase a real-time counter mem- ory, press the MEMORY button so that the M disap- pears from the screen.

M 0 : 00 : 00

5 To go to the tape location where you set the real-time counter to zero, press the REW(ind)/s button or the F.FWD/B button when playback is stopped. When the tape reaches the point at which you set the counter to zero, the tape will stop. Press the PLAY/o button to watch the tape.

					1,5
	POWER		SLEEP/WAKE UP
2			PLAY
	REW		STOP	F.FWD		3
	MENU	STATUS/EXIT			CLEAR
	1	2	3
	4	5	6		CH.
	7	8	9
		0	ALT.CH		VOL.
	SPEED	MEMORY PAUSE/STILL
	REC/OTR		TRACKING		MUTE

4

Helpful Hints

•The real-time counter memory will not function during Repeat Play mode. Details are on page 37.

•You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previ- ous real-time counter to zero

setting will be lost.