Magnavox MDR533H Press REC to start recording, To set one-touch timer recording OTR, Playback

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

	Press [REC] to start recording.			Press [STOP C] to stop recording.
	“I HDD” or “I DVD” will be displayed for 4 seconds.			As for DVD recording, the title list will appear
	e.g.) DVD
4				5 automatically after writing to a disc complete.
				(Refer to “Guide to a Title List” on page 83.)
				e.g.) DVD+R
		I DVD	SP(2Hr) 2h00m
	Press [PAUSE F] to pause recording.
	Press [PAUSE F]] or [REC] again to restart
	recording.
To set one-touch timer recording (OTR)...
					Please finalize the disc when the writing is
This is a simple way to set the recording time in blocks					completed before playing back on other DVD
					players.
of 30 minutes.
					Writing to Disc	90%

Press [REC] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen.

Introduction Connections Basic

One-touch timer recording will start.

I0h30m

0h30m	1h00m
(normal recording)
6h00m	5h30m

To change the recording length during the one- touch timer recording:

Press [REC] repeatedly until the desired length appear.

1	SP(2Hr)
NOV/25/12 11:00AM CH12 SP
SUN NOV/25/12	0:20:44
2
EMPTY SPACE
1:41:17 SP (2Hr)
• Press [STOP C] to exit the title list.

Setup Recording

To cancel the one-touch timer recording within the specified time:

Press [STOP C].

When the recording is completed, the unit will ask you whether to turn the unit to the standby mode except under conditions listed below.

-If a timer recording is programmed to start in 5 minutes.

-During playback of HDD or DVD.

-While displaying menus or information on the screen.

• The unit will be turned to the standby mode automatically if you select “Yes” or if you do not reply in 1 minute.

Note

•When you press [REC], recording starts immediately and continues until the HDD or disc is full, record 12 hours to HDD or you stop recording.

•This unit cannot record images with an aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 36-37 for more details.

•This unit cannot record in both stereo and SAP (secondary audio program) at the same time.

•You cannot change the recording mode during the recording pause mode.

•You can change a channel to be recorded during the recording pause mode.

•You can play back a title on one component while making a recording on other. To do so, simply select the component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD / DVD recording. And then follow the normal playback procedure.

•If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD] or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.

Note for one-touch timer recording

•The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen.

•Unlike the timer recording, you can perform the following operations during one-touch timer recording.

-Turning the power to the standby mode to stop one-touch timer recording.

-Using [REC] or [STOP C] on the remote control.

•You cannot use the pause function during one-touch timer recording.

Playback

Editing Function Setup Others

Español

EN 45