Magnavox MDR533H Setting The Clock, zone, then press OK, Use the Number buttons or K/ L

6 Use [the Number buttons] or [K/ L] to enter the desired major channel number to receive the Clock Data, then press [OK].

DTV

1

Set Channel No.

SETTING THE CLOCK

Manual Auto Clock Setting

7

Use [K/ L] to select the desired time

If the unit chooses an incorrect PBS channel on Cable

zone, then press [OK].

TV, set the PBS channel manually by following the steps

Time Zone

below.

Atlantic

1

Select “Manual” at step 4 in “Analog

Eastern

Central

Auto Clock Setting” on page 32, then

Mountain

press [OK].

Pacific

Alaska

Hawaii

Use [the Number buttons] or [K/ L]

Press [MENU] to exit and turn the

to enter your Cable TV Analog PBS

unit to the standby mode.

2 channel number, then press [OK].

This unit will search for the time only when the

8 power is in the standby mode. Initially leave it in

Set Channel No.

standby mode for at least 15 minutes to give this

CH

1

unit time to set the clock. Once the clock is set, the

unit receives the clock data at 12:00 am & 12:00 pm

when unit is in standby mode. Check the time after

3

Press [MENU] to exit and turn the

the Auto Clock was set, if it is incorrect time then set

unit to the standby mode.

the “Auto Clock Setting“ to “OFF” in step 4 above.

Then try “Manual Clock Setting“ on page 34.

Digital Auto Clock Setting

1

Press [MENU] and use [K/ L] to select

Note for auto clock setting

• The clock may set itself automatically after this unit

“General Setting”, then press [OK].

receives the antenna/cable signal and plug in the

“General Setting” menu will appear.

power cord.

• If the clock is not set correctly, timer recording does

2

Use [K/ L] to select “Clock”, then

not work properly.

press [OK].

• Analog off the air broadcasts have ended. Analog

auto clock setting will no longer be available except

“Clock” menu will appear.

via Cable TV. Try digital auto clock setting in this

case.

3

Use [K/ L] to select “Auto Clock

• For Digital auto clock setting, incorrect time may be

Setting”, then press [OK].

obtained depending on the broadcast information.

If this occurs, set the “Auto Clock Setting“ to “OFF”

at

4

Use [K/ L] to select “Manual”, then

step 4 and try “Manual Clock Setting“ on

page 34

press [OK].

Time adjustment for each time zone

Auto Clock Setting

Atlantic

GMT (Greenwich Mean Time ) - 4 hours

OFF

Eastern

GMT (Greenwich Mean Time ) - 5 hours

Auto

Manual

Central

GMT (Greenwich Mean Time ) - 6 hours

Enable Manual operation to select the DTV

Mountain

GMT (Greenwich Mean Time ) - 7 hours

Channel for receiving the Clock Data and

selecting your Time Zone below.

Pacific

GMT (Greenwich Mean Time ) - 8 hours

Alaska

GMT (Greenwich Mean Time ) - 9 hours

5

Press [{ ] to highlight “CH”. Press

Hawaii

GMT (Greenwich Mean Time ) - 10 hours

[K/ L] to select “DTV”, then press

[ B] .

Introduction Connections Basic Setup Recording Playback

Editing Function Setup Others

Español

EN 33