Magnavox MDV422 owner manual Front Panel

18 Front Panel

STANDBY-ON y Button

Press to turn the DVD Player on or off (standby).

STANDBY light

This light appears when the Player is in Standby mode, meaning the power is off.To turn on the Player, press the STANDBY-ON y button.

Disc Tray

Insert a Disc here. Load the Disc with the label facing up and the shiny side facing down. If the Disc is two-sided, place the Disc in the tray with the label of the side you want to play facing up. Details are on page 16.

ON light

This light appears when the Player’s power is on and the Player is ready to use. It flashes while the Player is turning on.

PLAY light

This light appears when a Disc is playing. It flashes when play is paused or during a search.

IR sensor

This infrared sensor receives the commands from the DVD Player’s remote control.When using the DVD Player’s remote control to operate the Player, point the remote here (not toward your TV).

STOP 7button

Press once to stop Disc playback. Play will resume from the same point the next time you start playback. Details are on page 16.

Or press STOP 7twice to stop Disc playback. Play will resume from the beginning of the Disc the next time you start playback.

You must stop playback by pressing STOP 7twice in order to access PREFERENCE PAGE in the DVD Player’s Setup menu.

PLAY/PAUSE 38button

Press to start playing a Disc. Press once during playback to pause play; press again to resume play from the same point.

OPEN/CLOSE / button

Press to open or close the Disc tray.You also can open or close the disc tray by pressing and holding the STOP 7 button on the remote control for three seconds.